EMBROIDERY MACHINE TECHNIQUE ERROR

sew4home-300banner

Needle breakage:

Several factors can lead to the problem

1) The needle may be overloaded due to the slow life, so it becomes unstable, and fracture occurs

2) The right attach the embroidery needle in the machine is critical that this can work properly. Is too loose, attach the embroidery machine or a wrong oblique position can lead to breakage of the needle stick.

3) fabrics which are very hard and stiff or show significant irregularities are very dangerous for an umbilical hernia. If a fabric or garment is too thick, it may be that moves while the needle inserted in the embroidery process the frame in textile. Accordingly, there is an immediate breaking of the needle. This is simply recognized by the needle is either bent or broken into several pieces. The frame motion can also be set as a rule in the software. Thus, you can repair or minimize these errors while embroidering. To avoid this, it is best to opt for the best embroidery machine for beginners

Upper thread loops slings embroidering

When forming the image stitched few loops or loops in the stick, this can have several reasons.

1) The thread tension may be too loose and should be somewhat firmer, stronger shot, make the machine but a careful and work here step by step. Screw on the embroidery machine each thread tensioner slowly and in half turn to the desired voltage. It is best to do to see the result immediately, directly during the embroidery process. Let yourself time when adjusting the needle thread tension. Too violent “senseless” turn the yarn tensioner without knowing what you can change exactly lead to an even worse mistake when embroidering.

2) Some machines have software installed loop formation by altering the frame motion, or embroidery needle can resolve to pierce. These functions should, however, best to discuss with the manufacturer of embroidery machine and may seek the opinion of an embroidery machine technician before hiring.

In general, these are the needle depth or the frame movement that needs to be adjusted.

Fadensplissing / Bird’s Nest

If the thread does not break immediately or breaks it comes to so-called splitting, the splitting of yarn fabric. This looks like a bird’s nest. Since an embroidery thread for embroidery always consists of several smaller threads is it can happen that tears and the yarn then dissolve speak slowly embroidering because of an error, one of the many threads. A primary cause of this is a truncated, broken needle or a fault in the thread run on the embroidery machine. The pollution can see to it a vital role. Keep your embroidery machine always as clean as possible. Dust, or other contaminants in the yarn path, e.g.,: Enemy brakeman or needle thread monitor can cause unpleasant errors and problems while embroidering.

If an embroidery machine vibrates excessively, it could mean that the machine is on a non-suitable ground. Padding by, e.g., rubber plates can minimize vibrations. In general, the embroidery machine should be on the holder provided or on a very robust and stable table.

Warning: If noise is heard as a loud ticking or grinding noises especially like metal on metal sounds, it means that there is a lack of the oil or grease. This problem should be corrected immediately as it can cause irreparable damage to the embroidery machine otherwise.

Maintenance of the embroidery machine.

The embroidery machine should always be and continually serviced and maintained by the user. Read operator’s manual and check where the engine needs oiling the locations and positions. There are places where you must lubricate and grease the machine every day, make some are maintenance-free and require only every few days or weeks Stickmaschinen oil or grease.

Some machines have software installed loop formation by adjusting the frame motion, or embroidery needle can resolve to pierce. These functions should, however, best to discuss with the manufacturer of embroidery machine and may seek the opinion of an embroidery machine technician before hiring.

In general, these are the needle depth or the frame movement that needs to be adjusted.

  • Needle changes: Along the needle bar, the embroidery head of the embroidery machine is a position at the regular oil has to be supplied. The oiling at this point should be done 1-2 times a week.
  • Vertical needle bar and spring: there should be a month oiled something once. Attention: After a less oiling small drop of a good embroidery machine oil, should you first run a few sample embroidery, so that the oil can be distributed in the device and then any excess oil, oil drops come on the textile.
  • Lower thread: oils there 1-2 times a day. If the bobbin is warm, it is high time for the oil. The bobbin should always be oily in general.
    Operator error

Embroidery machines are very easy to use. But it is to have necessary given the necessary training for the Stickbetreib. Let no employees without prior training on the embroidery machine.

A brief training by an expert in embroidery industry can save much time and much money to them under certain circumstances. An error such as The embroidery in the frame because of small clamping frame or use the wrong of the center can lead to high costs and particularly in a standstill Langen cause the embroidery machine.

Useful tool in embroidery

Razor blade or razor:

With a razor can the back of an embroidery separate into which they scrape the lower thread, so to speak. Works sometimes exquisite, but is not suitable for every embroidery.

Auftrenner:

A commercial buttonhole maker, a small crescent-shaped blade with unilateral sharpening.
Very handy for cutting and unravel the embroidery.

Lighters:

Lighters are very practical to burn small filaments and loops in embroidery, or to melt. This tool is a must for any embroiderer.

Air compressor with a water filter to clean the machine:

Regular air compressors are normally spraying microscopic water droplets with the air, which can eventually lead to rust of the computer.

Be the first to comment

Leave a Reply

Your email address will not be published.


*